home CCTV – I have had CCTV at home for 8 years now in one form or another. Over that time cam performance has increased, whilst prices have fallen.
Par for the course where a lot of technology is concerned I suppose. A year or so ago I gotten a Samsung CCTV switcher from eBay to view our cameras by modulating its output round all the TVs in the house.
Using its basic timer it switched between each cam at a set interval, while this worked it was discouraging as the cam you wanted to view was rarely the one that was on the screen at that particular moment in time. The eBay acquired switcher died a month or so ago and so the search for the “upgrade” was on.
Choosing a System – thinking about the spec for the new CCTV controller, there were several crucial features I wanted.
Net access – With our exchange finally being enabled for broadband I required something that would allow me to view the cameras over the Net.
LAN access – I wanted to be able to view cameras easily from any PC around the house.
PDA customer – the ability to view live pictures on my PDA.
Recording – I wanted something that would record. often our drive movement logs from HomeVision showed we’d had visitors, but we were unable to tell who. It would be great to have a recording to view on our return.
TV – I still wanted to be able to view the pictures on our TVs round the house
Be able to control PTZ (Pan, Tilt, Zoom) Cameras
From the list above it was clear I needed something very flexible, and the software was going to be as important, if not a lot more so than the hardware. After some research, demonstrations and chats with existing users I settled on the GeoVision range. These cards are not cheap, but I was pleased by the variety of features, especially the software. over the years I’ve often regretted my economies. Purchases that seem “good value” initially, are often a let down. On the other hand the a lot more expensive items I’ve purchased (Pronto and TiVo spring to mind) have supplied years of enjoyment. So I’m hoping my GeoVision system will bring similar satisfaction.
GeoVision build boards that are capable of between 16 and 400 frames per second (fps) using the UK friend TV standard. prices range from around £80 for a single cam 16fps card to over £1400 for a 16 cam 400fps one!
The purchase – I settled on the GV-650 card. This supplies 50 fps, that is 50 frames in total shared amongst the cameras attached to it. I initially was going to get the 8 cam version of the 650 card. however the 12 cam card was less than £40 a lot more than the 8 cam one and leaves room to expand the system, so in the end I made a decision to purchase it instead.
A bulk get of GeoVision cards and other CCTV equipment was organized by Stephen Jones of i-Home. the best prices were obtained from RF concepts who supplied the GV650-12.
The CCTV Server joins the other
PCs in the rack in Node Zero
(Click para agrandar)
Building the Box
I wanted the CCTV Server to live in the rack with the rest of the kit. having made a decision to build my “Node Zero” as a small space off the garage indicated that cord runs were longer than they would have been had I sited it in the middle of the house. However, putting it there has verified to be the ideal decision. There’s a significant amount of noise created by the PCs already there, never mind this new one. add to that the noise from the Network switch and various other ancillaries and you can see it would have been horrendous in the middle of the house.
Starting to take shape
(Click para agrandar)
Video capture is one of the most processor and disk intensive activities you can ask of your PC and it can highlight any hardware “issues” in your system. during my initial research I was encouraged by one vendor to purchase a certain motherboard for the system and I took their advice. The Gigabyte GA-8IK1100 is based on the Intel 875P: by means of Chipsets are a no-no for the higher spec GeoVisions. A beneficial list of other system requirements and recommendations is available on the RF concepts website.
In a bid to make sure the stability of my system and guarantee the quality of the recordings I made a decision to over-spec the CCTV server I was going to build. I used quality components and the CPU and RAM were well over the recommended specification. The overall cost of the maker was around £1,165 (not including the OS or CD-ROM drive). A significant investment! The components, prices and links are provided at the bottom of this article.
I remember being quoted £1,200 for a 1gig hard drive to opt for my first PC (a 486sx25). It was external and the size of a shoe box. The 160gig drive is a respectable size and currently a great price at £60. No doubt it will look expensive in another 10 years.
Multi-output from the GeoVision Cards D-Type
(Click para agrandar)
The recommendation is to create separate partitions for the OS and the video files. I created a 10gig partition for the operatinG SISTEMA, dejando más de 140 gig de cortesía en la partición de video. Un usuario con el que hablé ha estado grabando durante 5 meses en la configuración de la más alta calidad, utilizando 5 cámaras configuradas para grabar solo en movimiento. Sus grabaciones actualmente ocupan 110 gig en su disco duro. Una vez que las grabaciones alcancen la capacidad de la unidad, comenzarán a eliminar automáticamente las más antiguas para dejar espacio para las nuevas. Esto debe permitirle tener un archivo que se remonten meses en muchas aplicaciones. Los conceptos de RF tienen una calculadora de disco duro beneficioso para darle una idea del espacio que necesitará. Sin embargo, esto es para una grabación constante, por lo que los requisitos de espacio para un sistema de grabación basado en el movimiento son mucho más bajos.
Construir la PC era la tarea básica normal, el caso es de calidad respetable y tiene mucho espacio para unidades adicionales si es necesario. Instalé Windows XP Professional en la PC. La elección de estas tarjetas es Windows XP Professional o Windows 2000 Professional. He encontrado que XP es muy estable y una felicidad para usar, así que fui con él. Los automovilistas de la tarjeta Geovisión instalada sin problemas, la leva conectada y el sistema estaba en funcionamiento muy rápidamente.
Modulador (izquierda) que alimenta imágenes de CCTV
a todos los televisores alrededor de la casa
(Click para agrandar)
Conectando las cámaras: la geovisión se suministra con 2 conjuntos de cables. Las tiendas de tipo D en la parte posterior de la tarjeta permiten un conjunto de cables para cámaras 1-6, más dos entradas de audio, mientras que el segundo lote de 6 cámaras está conectado al segundo tipo D. Las conexiones de CAM son mediante enchufes BNC. Si sus cámaras se suministran con Phonos, puede obtener un pequeño y útil enchufe BNC al adaptador de socket de fono: el número de pieza de Maplins fa11m.
Tenemos una colección de cámaras colegas alrededor del interior y fuera de la casa. Por razones evidentes, no quiero mostrarlos a todos, o regalar algunas de las posiciones mucho más encubiertas, es suficiente decir que cubren la propiedad de manera integral. El sistema también puede continuar grabando si la alimentación se corta gracias a los monstruos en el bastidor que proporciona la PC y las cámaras. La pequeña “cámara de tablero” que monitorea el garaje (bellamente montada con Blu-tak en la parte superior de un PIR) era inferior a £ 50. Lo recibí en una visita a Henry’s CCTV en Londres hace varios años. La pequeña cámara de color se obtuvo de Makro y la cámara del domo era de alrededor de £ 30 de una fuente china por medio de eBay. Esa cámara, como muchas de las otras, están conectadas al nodo cero por medio de un solo cable Cat5. Esto permite la potencia y la señal de video en un solo cable. La excepción a esto son las cámaras más grandes (consulte la imagen de “leva baja de alta calidad” a continuación) que requiere voltajes principales para los calentadores de pantalla. Para estas cámaras utilizamos cable coaxial (algunos CT100 sobrantes del cableado del resto de la casa).
Mini Color Cam
Cámara de tablero en el garaje
Cúpula
Cam de alta calidad de alta calidad
En mi experiencia, se trata de obtener lo que pagas con cámaras. Las cámaras Dome y Board son de baja calidad. La pequeña cámara de color está bien siempre que haya buena luz, pero una vez que comienza a ponerse un poco oscuro, se vuelve muy granulada y la calidad cae ideal. Sin embargo, las grandes cámaras en las carcasas son excelentes. Hacen que parezca que es la luz del día afuera durante las horas del anochecer. Incluso puedes distinguir algunos detalles solo con la luz de una luna llena en una noche despejada. Recientemente obtuve una cámara de día/noche de Sony de Lets Automate, una que es color durante el día, luego cambia al blanco y negro para condiciones de poca luz. Todavía no he probado esto, pero parece la mejor manera de hacerlo en estos días.
El televisor en la tarjeta de video ASUS estaba habilitado y la señal compuesta se alimentó en el modulador que había usado previamente con el conmutador Samsung. Esto permite que el canal 9 en cada televisor vea el escritorio del servidor CCTV que se configura con el software GeoVision maximizado (capturas de pantalla que llegan en la Parte 2). Asegúrese de consultar los “canales tabú” en su sistema antes de elegir un canal para establecer su modulador también. Consulte para http://www.kat5.tv/taboo.html muchos más detalles y descargue nuestra aplicación de calculadora de canales de Little Taboo desde aquí.
Entonces, el sistema está en funcionamiento. En unas semanas informaré con mis experiencias. ¿El sistema es estable? ¿Funciona realmente el registro de movimiento? ¿Es el software fácil de usar? ¿Cuál es el indicador de la vida? Todo esto y mucho más serán respondidos en la próxima entrega emocionante de … Home CCTV.
Lista de piezas del servidor CCTV
Caso – Samcheer 4u 19 ″ Black RackMount 300W ATX PSU – £ 140
http://www.microdirect.co.uk
CPU – Intel Pentium 4 “Northwood” 2.8GHz (800FSB) – £ 130
http://www.overclockers.co.uk/acatalog/online_catalogue_intel_cpus_15.html
Placa base-gigabyte ga-8ik1100-£ 90
http://www.overclockers.co.uk/acatalog/gigabyte.html
Tarjeta de video – ASUS V9520VS GEFORCE FX 5200 128MB – £ 65.00
http://www.overclockers.co.uk/acatalog/asus_nvidia_graphics_cards.html
RAM – 1 concierto de DDR PC3200 crucial, ECC, DDR400 – £ 170
http: // www.crucial.com/uk
Disco duro – Maxtor Diamondmax 160Gig 7,200 rpm – £ 70
http://www.overclockers.co.uk/acatalog/online_catalogue_maxtor_hard_drives_9.html
Tarjeta CCTV-Geovisión GV650-12-£ 500
http://www.rfconcepts.co.uk/
¿Quieren más? – Síganos en Twitter, como nosotros en Facebook, o suscribirse a nuestro feed RSS. Incluso puede entregar estas noticias por correo electrónico, directamente a su bandeja de entrada todos los días.